Still, many notice that stucco pays itself over time due to its longevity, durability, and energy efficiency. EIFS is an acrylic product that installers apply to a lower panel, such as an insulating plate, a layer board, a polystyrene plate, or other external coating. It is more flexible than traditional stucco and consists of a moisture barrier, foam insulation, cement bottom, reinforcing fiberglass mesh and an acrylic finish.
Due to its stiffness, temperature changes and house changes can cause unpleasant cracks. Drilling stucco for maintenance or modification can also be challenging. Installing traditional stucco coating on wood, typical in American construction, costs approximately $ 8.50 per square foot.
Most of the costs are attributed to labor-intensive materials that cost an average of $ 1.68 per square foot. An exterior stucco wall with a metal or wood slat base and three stucco layers should be placed on a support structure such as wood, concrete or brick. Stucco is a high-end coating that costs 60% more than vinyl or aluminum coating, but long-term stucco costs may be cheaper due to its durability. Stucco is thicker than many coatings, such as vinyl coating, for example. It is also made of dense material that serves as a powerful insulator. Stucco stacking can help your home be more energy efficient and save on heating and cooling costs.
While stucco is also made from natural materials, such as Portland cement, sand9, water, and lime, the stucco coating will not last as long as the bricks. There is also a high cost of energy in the production process, and if it must be shipped over long distances, kitchen renovation contractor garnet valley pa there will be considerable fuel consumption. There is not much difference between the energy efficiency of brick and stucco. Both offer an R value, which is the ability of a material to resist heat flow, or approximately 0.4, about half that of the wood coating.
Most stucco houses are located in California, Texas, Florida, and Arizona, which have quickly seized these Spanish coatings. Fibrocement coating is affordable and generally costs between $ 6 and $ 10 per square foot. Homeowners who choose to sell their home in the future can expect to recover 79% of their initial lining. Since fibrocement is heavy and requires specialized molding and installation skills, it is important to find a specialized contractor for the installation of this particular type of coating. Due to the weight of the brick, installation costs of adding brick cladding to your home can be significantly more expensive compared to other options.
Although they need more maintenance, they don’t cost the same as repairing a brick house outside. Installing stucco that extends over a brick, concrete, or masonry surface in good condition costs $ 3 to $ 6 per square foot or about $ 4.50 per square meter. Installing stucco on stone is an excellent option to add additional insulation to your home. The average cost of stuccoing a house is $ 6 to $ 9 per square foot, including materials and labor.